Model: LED curing light handpiece

standard head product description:

light guide ROD with 6 adabter

LED lightwaystation

mainadapter

lightcoverplate

screwdriver

operation manual

handpiece battery DC 3,6volt ~4,2volt Li-Ionen,
2200mAh basestation voltage DC 9Volt + 0,5

power consumption < 10watt

mainadapter AC90 ~ 250volt, 50~60Hz

optical wavelength : 430-490 NM

working time setting 20sec. (it sounds once every 10sec.)

solidifying depth after 20sec. light radiance- the depth of resin solidification is more then 4 mm
working temperature: 5~ 40 degree centigrate. RH : < 80%

the three LED light on the low position act as working mode indicatior

green light: fast curing : timesetting 20sec (every 10 sec it sounds)

red light : pulse curing : interrupte radiating (every 10 sec it sounds)

orange : step curing : softstart for 10 sec from 0 to fullpower, than fullpower.during the later 10sec.

basestation: It is used for charing the battery of the handpiece , and measuring the light strength.

LED color: light strength

LED color: green normal

LED red color: light strength insufficiency

for operation there is one pushbutton , and has a double color LED indicatore on the upper position, and three different color LED indicatores on the lower position.

- mode select : press the push button for at least 2 sec and then the mode will change.

- the cycling mode as follows: fastmode -> pulsemode -> stepmode-> fast mode .

- on the upper LED ( double color ) acts as the curing status indicator.

LED color status indication: green normal-- red battery voltge low-- red flashing LED curing light: handpeace over- headed.

Dentalprctice Equipment

Dental-Units

Intraoral-Camera-Systems

Dental- Gifts